As a leading high and new technology corporation in the industry, we focus on technology innovation, whilebeing dedicated to talents training and development. Our core values include harmony and teamwork, seamless cooperation, trust and encouragement. We offer the employees humanistic surroundings, integrated and diverse trainingsystem, competent compensation and benefits. Here is the ideal starting point to set sail your career, the best stage to realize your dream! Comeand join us, explore an exciting and challenging professional journey!

Job Matches

Position
  • Manufacturing
  • Research and development
  • Manufacturing Supporting
  • Administration
major
  • Materials
  • Microelectronics
  • Physics
  • Electronics Science and Technology
  • Industrial Engineering
  • Photo information and science
  • Chemicals
  • Mechanical / Automation
  • Electricity engineering and automation

Yield Engineer

Job responsibility:
  • Defect root cause and Yield killer ratio study for new technology/new process developing and mass production product;
  • Set up and good maintenance of professional inspection recipe and Define sampling rule & layer for each product;
  • In time highlight inline excursion and co-work with module and lot owner for issue tool and lot disposition;
  • Maintain inline defect trend chart and form task force for big event and baseline defect issue to continuous improve the defect performance;
  • Part of job is for new skill, new system, new technology installation to improve team working efficiency;
  • Defect lesson learn summary and internal training regularly and make sure fresh engineer& assist engineer has his professional skill.

Product Engineer

Job responsibility:
  • To perform electrical failure analysis (EFA), correctly interpret the physical meaning or mechanism and verify it with physical failure analysis (PFA) for yield loss or reliability failure, according to assignment;
  • To analyze CP data, WATdata, in-line data, EFA, PFA data, etc. and summarize in technical reports for yield and reliability enhancement guidance;
  • During production phase, to perform routine monitor of trend charts and yield loss Pareto analysis of various products to provide directions for yield & reliability enhancement;
  • To work with PIE dept. on the abnormal low yield wafer & lot analysis.

Process Engineer

Job responsibility:
  • Set up process requirement for production tool;
  • Solve all issue for production tool and process;
  • Improve and develop process and flow;
  • Evaluate new tool, process and material, cost down;
  • Optimized and improve SPC index;
  • Maintain process stable.

Yield Engineer

Job responsibility:
  • Defect root cause and Yield killer ratio study for new technology/new process developing and mass production product;
  • Set up and good maintenance of professional inspection recipe and Define sampling rule & layer for each product;
  • In time highlight inline excursion and co-work with module and lot owner for issue tool and lot disposition;
  • Maintain inline defect trend chart and form task force for big event and baseline defect issue to continuous improve the defect performance;
  • Part of job is for new skill, new system, new technology installation to improve team working efficiency;
  • Defect lesson learn summary and internal training regularly and make sure fresh engineer& assist engineer has his professional skill.

Product Engineer

Job responsibility:
  • To perform electrical failure analysis (EFA), correctly interpret the physical meaning or mechanism and verify it with physical failure analysis (PFA) for yield loss or reliability failure, according to assignment;
  • To analyze CP data, WATdata, in-line data, EFA, PFA data, etc. and summarize in technical reports for yield and reliability enhancement guidance;
  • During production phase, to perform routine monitor of trend charts and yield loss Pareto analysis of various products to provide directions for yield & reliability enhancement;
  • To work with PIE dept. on the abnormal low yield wafer & lot analysis.

Process Integration Engineer

Job responsibility:
  • Process flow handle & maintain to improve production yield;
  • Quickly trouble shooting and co-work with module to make sure process flow smooth;
  • To improve WAT CP/CPK.

Yield Engineer

Job responsibility:
  • Defect root cause and Yield killer ratio study for new technology/new process developing and mass production product;
  • Set up and good maintenance of professional inspection recipe and Define sampling rule & layer for each product;
  • In time highlight inline excursion and co-work with module and lot owner for issue tool and lot disposition;
  • Maintain inline defect trend chart and form task force for big event and baseline defect issue to continuous improve the defect performance;
  • Part of job is for new skill, new system, new technology installation to improve team working efficiency;
  • Defect lesson learn summary and internal training regularly and make sure fresh engineer& assist engineer has his professional skill.

Product Engineer

Job responsibility:
  • To perform electrical failure analysis (EFA), correctly interpret the physical meaning or mechanism and verify it with physical failure analysis (PFA) for yield loss or reliability failure, according to assignment;
  • To analyze CP data, WATdata, in-line data, EFA, PFA data, etc. and summarize in technical reports for yield and reliability enhancement guidance;
  • During production phase, to perform routine monitor of trend charts and yield loss Pareto analysis of various products to provide directions for yield & reliability enhancement;
  • To work with PIE dept. on the abnormal low yield wafer & lot analysis.

Process Engineer

Job responsibility:
  • Set up process requirement for production tool;
  • Solve all issue for production tool and process;
  • Improve and develop process and flow;
  • Evaluate new tool, process and material, cost down;
  • Optimized and improve SPC index;
  • Maintain process stable.

Process Integration Engineer

Job responsibility:
  • Process flow handle & maintain to improve production yield;
  • Quickly trouble shooting and co-work with module to make sure process flow smooth;
  • To improve WAT CP/CPK.

Equipment Engineer

Job responsibility:
  • Create the maintenance system of production machine;
  • Create the monitor system of production equipment;
  • Associate the production line’s request to Improve the productivity;
  • Associate facility dept. to improve the equipment uptime;
  • Equipment trouble shooting and alarm analysis. to improve reliability;
  • Second source spare parts evaluation, to achieve cost reduction.

Supervisor

Job responsibility:
  • Achieve daily on-time delivery;
  • TE training/area headcount balance;
  • Operation rule/working flow follow-up & improvement;
  • Abnormally report & problem highlight;
  • To Improve the production system;
  • Safety/6S sustain;
  • Acting section manager when the section manager personal leave;
  • Tool capacity calculated by month and bottleneck tool relieve;
  • To analysis M.O case and prevention;
  • Support to training new income supervisor.

Industrial Engineer

Job responsibility:
  • Fab & clean room layout planning;
  • Capacity & performance analysis;
  • Office layout planning;
  • Master schedule control & management;
  • Time study analysis;
  • Project management.

Production Planning Engineer

Job responsibility:
  • Maintain production parameters and review their reasonability each month;
  • Order monitor and on-time delivery control;
  • Wafer Start Plan;
  • WIP control and Cycle Time reduction;
  • Capacity confirmation;
  • Performance Estimation;
  • Supply-demand balancing.

Planner

Job responsibility:
  • Control product to achieve company’s DPML/CLIP/CVP goal;
  • Bullet/SHL/HL management;
  • Inventory WIP management;
  • Capacity management;
  • TD project supporting;
  • Host daily MFG internal meeting to balance production WIP;
  • Host daily OP meeting and date preparation.

Equipment Engineer

Job responsibility:
  • Create the maintenance system of production machine;
  • Create the monitor system of production equipment;
  • Associate the production line’s request to Improve the productivity;
  • Associate facility dept. to improve the equipment uptime;
  • Equipment trouble shooting and alarm analysis. to improve reliability;
  • Second source spare parts evaluation, to achieve cost reduction.

Process Engineer

Job responsibility:
  • Set up process requirement for production tool;
  • Solve all issue for production tool and process;
  • Improve and develop process and flow;
  • Evaluate new tool, process and material, cost down;
  • Optimized and improve SPC index;
  • Maintain process stable.

Yield Engineer

Job responsibility:
  • Defect root cause and Yield killer ratio study for new technology/new process developing and mass production product;
  • Set up and good maintenance of professional inspection recipe and Define sampling rule & layer for each product;
  • In time highlight inline excursion and co-work with module and lot owner for issue tool and lot disposition;
  • Maintain inline defect trend chart and form task force for big event and baseline defect issue to continuous improve the defect performance;
  • Part of job is for new skill, new system, new technology installation to improve team working efficiency;
  • Defect lesson learn summary and internal training regularly and make sure fresh engineer& assist engineer has his professional skill.

Process Engineer

Job responsibility:
  • Set up process requirement for production tool;
  • Solve all issue for production tool and process;
  • Improve and develop process and flow;
  • Evaluate new tool, process and material, cost down;
  • Optimized and improve SPC index;
  • Maintain process stable.

Equipment Engineer

Job responsibility:
  • Create the maintenance system of production machine;
  • Create the monitor system of production equipment;
  • Associate the production line’s request to Improve the productivity;
  • Associate facility dept. to improve the equipment uptime;
  • Equipment trouble shooting and alarm analysis. to improve reliability;
  • Second source spare parts evaluation, to achieve cost reduction.

Equipment Engineer

Job responsibility:
  • Create the maintenance system of production machine;
  • Create the monitor system of production equipment;
  • Associate the production line’s request to Improve the productivity;
  • Associate facility dept. to improve the equipment uptime;
  • Equipment trouble shooting and alarm analysis. to improve reliability;
  • Second source spare parts evaluation, to achieve cost reduction.
  • Physics
  • Microelectronics
  • Electronic engineering
  • Integrated circuit design

Research and Development Engineer

Job responsibility:
  • Generate technology related documents, such as design rule, electrical targets, process flow & specifications, etc. according to assignment;
  • Generate or verify production related documents, such as process release record (PRR), PROD, etc., according to assignments;
  • Design of experiment for device tuning, yield enhancement, quality & reliability improvements, process window check, specification window check, etc;
  • Engineering lot tracking, data analysis, lot summary report;
  • Troubleshooting by statistical analysis;
  • Assist to execute process & product qualification.

Advanced Process Engineer

Job responsibility:
  • Set up process for TD's new project.
  • Solve process issues of existing process for mass production.
  • Evaluate new tool, process and material, cost down.
  • Optimize and improve SPC index.
  • Transfer mature technology to Fab.
  • directly communicate with customer for process development / problem solving.
  • need to be on duty on weekend(OT).

Testing Engineer

Job responsibility:
  • Routing monitor and maintain CP equipment and probe card. Guarantee good performance of test equipment and probe card;
  • Build or modify GPIB or other hardware driving code;
  • Survey, estimate, setup and release new test equipment;
  • Survey, estimate and manage spare parts;
  • Test equipment trouble shooting and releasing for production within limited time;
  • Cooperate with software engineer to release new product or resolve testing trouble;
  • Support MFG to guarantee CP test line smoothly.

Design Service Engineer

Job responsibility:
  • Perform TCAD Simulation, coding and model parameter extraction accordingly for new process development;
  • Improve process by experiment design, data analysis and problem solving.

Research and Development Engineer

Job responsibility:
  • Generate technology related documents, such as design rule, electrical targets, process flow & specifications, etc. according to assignment;
  • Generate or verify production related documents, such as process release record (PRR), PROD, etc., according to assignments;
  • Design of experiment for device tuning, yield enhancement, quality & reliability improvements, process window check, specification window check, etc;
  • Engineering lot tracking, data analysis, lot summary report;
  • Troubleshooting by statistical analysis;
  • Assist to execute process & product qualification.

Advanced Process Engineer

Job responsibility:
  • Set up process for TD's new project.
  • Solve process issues of existing process for mass production.
  • Evaluate new tool, process and material, cost down.
  • Optimize and improve SPC index.
  • Transfer mature technology to Fab.
  • directly communicate with customer for process development / problem solving.
  • need to be on duty on weekend(OT).

Spice Modeling Engineer

Job responsibility:
  • Logic Device testing and SPICE model generation;
  • Analog/RF device Characterization & Modeling;
  • Modeling Testing Structure Design;
  • Measurement and device lab support and maintenance;
  • Customer support.

Testing Engineer

Job responsibility:
  • Routing monitor and maintain CP equipment and probe card. Guarantee good performance of test equipment and probe card;
  • Build or modify GPIB or other hardware driving code;
  • Survey, estimate, setup and release new test equipment;
  • Survey, estimate and manage spare parts;
  • Test equipment trouble shooting and releasing for production within limited time;
  • Cooperate with software engineer to release new product or resolve testing trouble;
  • Support MFG to guarantee CP test line smoothly.

CAD Engineer

Job responsibility:
  • CAD design environment development, maintenance and support.
    1. Familiar with EDA software installation, update and investigation;
    2. Familiar with EDA license installation, update and management;
    3. Familiar with Unix/Linux operation system and optimize computer farm efficiency;
    4. Familiar with user setup and remote login gateway;
    5. Maintain and manage the CVS data system;
    6. Familiar with workstation and network system configuration and investigation.
  • Design engineering service support and design automation service support.
    1. Familiar with develop automation scripts and feature utilities to help improve work efficiency and enrich IC design and verification methodologies;
    2. Design engineering project directories setup and database management;
    3. Responsible for internal and external data transfer, such as FTP, etc;
    4. Maintain design service application system;
    5. To be compliant to task arrangement with good sense of teamwork;

Layout Engineer

Job responsibility:
  • Work on IP layout design & LVS, DRC verification;
  • Work on test chip layout design & verification.

Design Service Engineer

Job responsibility:
  • Perform TCAD Simulation, coding and model parameter extraction accordingly for new process development;
  • Improve process by experiment design, data analysis and problem solving.
  • Chemicals
  • Safety Engineering
  • Electricity engineering and automation
  • Water supply and drainage
  • Environment
  • Computer
  • Heating and ventilation
  • Refrigeration and cryogenics technology

Quality Engineer

Job responsibility:
  • To establish proper quality system management procedures(ISO9001,TS16949 );
  • Provide guidance to other departments to set up needed quality management procedure;
  • To establish and implement Information Security Management System(ISO27001);
  • Conduct internal audit (TS16949, ISO27001, ISO14064,etc) and ensure closure of audit findings;
  • Implement continuous improvement in Grace;
  • Coordinate the third party audit, follow up the non-conformities;